URSALEO CLOUD PLATFORM

Pre-tested Hardware

Hardware

OVERVIEW

Pre-tested hardware allows you to start sending sensor data to the cloud in minutes

Checklist

  1. Create a cloud account at https://services.ursaleo/invite
  2. Assemble either the NXP or Raspberry Pi hardware components. Pre-packaged kits can be bought here.
  3. Download the Yocto or Raspbian image from https://services.ursaleo.com/secure/imagelist
  4. Flash the image, connect to a network and start sending data to the cloud!

NXP kit

  1. NXP iMX6 Ultra-Lite processor development board. P/N MCIMX6UL-EVKB
  2. Murata WiFi / BLE development board. P/N LBEE5KL1DX-TEMP-DS-SD
  3. Silicon Labs Thunderboard 2 sensor board. P/N SLTB005A
  4. Assemble the components, insert a flashed SD card and follow instructions to register the device.
Note: The pre-packaged NXP kits also include a custom LED debug board. This shows sensor, network and cloud connectivity status.

Raspberry Pi kit

  1. Raspberry Pi 3B, 3B+ or 4
  2. Silicon Labs Thunderboard 2 sensor board P/N SLTB005A, or a Bosch Sensortec BME280 I2C breakout board
  3. Download the Yocto or Raspbian image from https://services.ursaleo.com/secure/imagelist
  4. Insert a flashed SD card and follow instructions to register the device.
Note: The pre-packaged Raspberry Pi kits also include a custom LED debug board. This shows sensor, network and cloud connectivity status.

Custom Hardware

Adding your own hardware to the system requires you to send messages as specified by our API.